Sweat-shirt Navajo Beyond: Two Souls : design, durabilité et entretien

Réponse rapide

Lavez le sweat Navajo de Beyond: Two Souls à l'envers, à l'eau froide, en cycle délicat, puis séchez-le à l'air libre en le posant à plat ou en le suspendant loin de toute source de chaleur directe. Évitez l'assouplissant et le sèche-linge, car la chaleur et la friction sont ce qui fissure les impressions sérigraphiées et rétrécit le coton 100 % bio. Suivez cette routine et le coton 350gsm ainsi que l'impression devant et manches résisteront à un usage régulier.

Le sweat Navajo Beyond: Two Souls est un pull régulier à manches montées en 100 % coton bio, 350gsm, avec sérigraphie sur le devant et les manches. Ces détails déterminent la façon de l'entretenir : un coton plus lourd conserve sa forme mais rétrécit encore à la chaleur, et les sérigraphies reposent sur le tissu plutôt que de s'y imprégner.

Ce guide détaille la routine d'entretien étape par étape, signale les erreurs qui abîment le plus vite les impressions et explique ce que les informations du catalogue disent et ne disent pas avant l'achat.

De quoi est réellement fait le Navajo Sweatshirt

La fiche produit indique une coupe régulière avec manches montées, 100% coton biologique en 350gsm, et une impression sérigraphiée sur le devant et les manches. Le poids de 350gsm le place dans la catégorie des sweats plutôt que des t-shirts légers, il tombe donc avec une certaine structure au lieu de coller au corps. Le coton biologique de ce poids a tendance à devenir plus dense et plus doux avec le temps, mais il réagit à la chaleur de la même manière que n'importe quel coton.

The design is described as the iconic Navajo Collection print seen on Jodie's in-game T-shirt, now offered as both a T-shirt and a sweatshirt. That matters for care: a print that covers the front and extends onto the sleeves has more edges and flex points, so it is more exposed to cracking than a small chest logo.

• Check the label on arrival and follow it if it conflicts with general advice.
• The catalog does not list a dryer rating or a print-specific cure method, so treat heat as the risk to avoid.

Wash it inside out, cold, on a gentle cycle

Turn the sweatshirt inside out before it goes anywhere near the machine. Inside out, the drum and other garments rub against the cotton rather than the print, which is the single easiest way to slow print wear. Use cold water and a gentle or delicate cycle, and keep the load loosely packed so the fabric is not twisted against itself.

Use a mild detergent and skip fabric softener. Softener leaves a residue that can dull a screen print and reduce the cotton's natural softness over time. If the sweatshirt is only lightly worn, a cold rinse cycle is often enough; save the full wash for actual soiling.

• Common mistake: washing with heavy items like jeans or towels, which abrade the print.
• Checkpoint: if you can see the print through the fabric when inside out, it is correctly turned.

Air dry instead of tumble drying

Heat is the main enemy of both the print and the fit. Tumble drying at high heat can shrink 100% cotton and make a screen print crack or lift at the edges. Instead, reshape the sweatshirt by hand while it is damp, then lay it flat on a drying rack or hang it on a padded hanger away from radiators and direct sun.

If you must use a dryer, choose the lowest heat setting and remove the sweatshirt while it is still slightly damp, then finish by air drying. That reduces the time heat is applied without leaving it wet long enough to develop odors.

• Hanging by the shoulders on a thin wire hanger can stretch the neckline; use a wide or padded hanger.
• Drying flat is the safest option for preserving the set-in sleeve shape.

Handle stains and ironing without wrecking the print

Blot stains with a clean cloth and cold water as soon as possible, working from the outside of the stain inward so you do not spread it. Avoid hot water and chlorine bleach, which can fade the cotton and damage the print. For stubborn marks, apply a small amount of mild detergent directly and rinse before washing as usual.

If the sweatshirt needs pressing, iron it inside out and never place the iron directly on the printed areas. A warm setting with no steam is enough for cotton; steam plus direct contact is what causes prints to stick, shine, or peel. Let the garment cool completely before folding it away.

• Common mistake: ironing the front print to smooth wrinkles, which can melt or glaze the ink.
• Checkpoint: if the iron touches the print, stop and reposition the garment inside out.

Storing it between wears

Fold the sweatshirt rather than hanging it for long-term storage. Hanging a 350gsm cotton garment for months can pull the shoulders out of shape and stretch the neckline. Keep it in a dry, dark place; prolonged direct sunlight can fade the cotton and the print over time.

If you store it seasonally, make sure it is fully dry first. Damp cotton packed away can develop mildew, which is difficult to remove without harsh treatment that would also affect the print.

• Cedar or lavender sachets help with storage freshness without adding moisture.
• Avoid vacuum bags for long-term storage of prints, since compression can crease the ink.

Your step-by-step Navajo Sweatshirt care routine

1. Turn it inside out and check pockets: Empty any pockets and flip the sweatshirt so the printed front and sleeves face inward. This puts the cotton between the print and the drum. Checkpoint: the print should not be visible from the outside before you load the machine.
2. Wash cold on a gentle cycle with mild detergent: Select cold water and a delicate or gentle cycle. Add a small amount of mild detergent and skip fabric softener and bleach entirely. Common mistake: overloading the machine, which increases friction on the print.
3. Reshape and air dry away from heat: Lift the sweatshirt out, reshape the shoulders and sleeves by hand, and lay it flat on a rack or hang it on a padded hanger away from radiators and direct sun. Checkpoint: if the garment is still damp after several hours, rotate it rather than reaching for the dryer.
4. Iron inside out only if needed: Use a warm, steam-free setting and press the inside of the fabric. Never let the iron touch the screen print directly. Common mistake: ironing the print to remove wrinkles, which can crack or glaze the ink.
5. Fold and store dry: Once fully dry and cool, fold the sweatshirt and store it in a dry, dark place. Avoid hanging it for long periods to protect the neckline and shoulders. Next step: rotate it into regular wear rather than storing it compressed for months.

Product facts worth knowing

• Beyond two Souls - Navajo Sweatshirt: Regular fit with set-in sleeves, 100% organic cotton at 350gsm, front and sleeve screen print. The heavier cotton and set-in sleeves give it a structured fit, while the extended print means more surface area to protect during washing and ironing.
• Beyond: Two Souls Tee: 100% cotton at 210gsm, Department of Paranormal Activities design. If you prefer a lighter layer for warmer months or want a matching set, the tee uses the same cotton care logic but a lighter weight.
• Quantic Dream Mug: 100% ceramic, microwaveable, features the Quantic Dream studio logo. A low-maintenance companion piece for your desk; unlike the sweatshirt, it tolerates the microwave, though hand washing keeps the logo crisp.

The Beyond: Two Souls Navajo Sweatshirt is straightforward to care for once you treat heat and friction as the two things to avoid. Wash it inside out in cold water, air dry it, and keep the iron off the print, and the 350gsm organic cotton and screen print will hold up through everyday wear.