Detroit: Become Human LED Red Ring Tee: Print and Care Guide
By Qfficial Quantic Dream Merc | Published: 2026-10-16
Category: Tips & Care
Keep your LED Red Ring tee's oversized fit, heavyweight cotton, and screen print looking sharp with this step-by-step wash and care routine.
Quick answer
Wash your LED Red Ring tee inside out in cold water on a gentle cycle, then hang it to dry away from direct heat. Skip the dryer and iron the print only from the reverse side if needed. This protects the softhand screen print and keeps the oversized 235gsm cotton from shrinking or fading.
Why this tee needs a different routine
The Detroit: Become Human - Android LED Red Ring T-shirt is built from 235gsm heavyweight cotton with an oversized fit and a front and back softhand screen print. That combination is comfortable but not indestructible. Heavy cotton can shrink if exposed to high heat, and screen prints sit on top of the fabric, so they are vulnerable to abrasion and cracking when washed with rough items or dried on high.
Unlike sublimation prints that are embedded into the fabric, screen prints need a bit more care to stay smooth. The good news is that a few simple habits will keep the red ring graphic and the black reactive-dyed cotton looking close to new for years.
What to check before you wash
Before washing, look at the care label inside your tee. The custom woven interior neck back label may include specific instructions that differ from general advice. If the label says something different, follow it. Also check the print for any lifting edges or cracks. If you see damage, treat the tee more gently and avoid any heat.
Always separate dark colors from lights for the first few washes. The reactive-dyed black cotton can release a small amount of dye, especially when new. Washing it with light-colored clothes could dull them.
Choosing the right detergent and load
Use a mild liquid detergent without bleach or fabric softener. Bleach will fade the black cotton and break down the print, while fabric softener leaves a residue that can make the print feel stiff and look dull over time. For the same reason, avoid detergent pods that may not dissolve fully in a cold, gentle cycle.
Wash the tee with similar-weight items, like other cotton t-shirts or light sweatshirts. Zippers, hooks, and rough denim can snag the print. If you only have a few items, use a mesh laundry bag to protect the tee from friction.
Step-by-step wash and care routine
- Turn the tee inside out: Flip the shirt so the printed side faces inward. This shields the screen print from rubbing against other garments and the drum. Checkpoint: make sure the print is fully covered and no part is exposed.
- Wash cold on a gentle cycle: Set your machine to cold water and a delicate or gentle cycle with a low spin speed. Use a mild liquid detergent without bleach or softener. Common mistake: using warm or hot water, which can shrink the cotton and fade the black dye.
- Skip the dryer and air dry: Lay the tee flat or hang it on a padded hanger to dry away from direct sunlight and radiators. If you must use a dryer, choose the lowest heat setting and remove the tee while slightly damp. Checkpoint: high heat is the fastest way to crack a screen print and shrink an oversized fit.
- Iron only from the inside: If the tee is wrinkled, iron it inside out on a low setting. Never place the iron directly on the print. For stubborn creases, use a pressing cloth over the print. Common mistake: ironing the front of the print, which can melt or smear the ink.
- Store folded, not hung: Fold the tee and store it in a drawer or on a shelf. Hanging can stretch the shoulders and distort the oversized fit over time. Next step: rotate your tee with other favorites to reduce wear from frequent washing.
Product facts
- Detroit: Become Human - Android LED Red Ring T-shirt: Custom heavyweight, oversized black reactive-dyed tee made from 100% cotton at 235gms. The heavy cotton holds its shape well but can shrink with high heat, so cold washing and air drying are key.
- Detroit: Become Human - Android LED Red Ring T-shirt: Front and back softhand screen print. Screen prints sit on the fabric surface and need protection from abrasion and direct heat to avoid cracking or fading.
