Beyond: Two Souls Navajo Sweatshirt: Design, Durability, and Care

Quick answer

Wash the Beyond: Two Souls Navajo Sweatshirt inside out in cold water on a gentle cycle, then air dry it flat or hang it away from direct heat. Skip fabric softener and the dryer, because heat and friction are what crack screen prints and shrink 100% organic cotton. Follow that routine and the 350gsm cotton and front-and-sleeve print hold up through regular wear.

The Beyond: Two Souls Navajo Sweatshirt is a regular-fit, set-in-sleeve pullover made from 100% organic cotton at 350gsm, with screen printing on the front and sleeves. Those details decide how you should treat it: heavier cotton holds its shape but still shrinks with heat, and screen prints sit on top of the fabric rather than soaking into it.

This guide walks through the care routine step by step, flags the mistakes that damage prints fastest, and explains what the catalog facts do and do not tell you before you buy.

What the Navajo Sweatshirt is actually made of

The catalog lists a regular fit with set-in sleeves, 100% organic cotton at 350gsm, and screen printing on the front and sleeve. The 350gsm weight puts it in sweatshirt territory rather than lightweight tee territory, so it hangs with some structure instead of clinging. Organic cotton at that weight tends to feel denser and softer over time, but it still responds to heat the same way any cotton does.

The design is described as the iconic Navajo Collection print seen on Jodie's in-game T-shirt, now offered as both a T-shirt and a sweatshirt. That matters for care: a print that covers the front and extends onto the sleeves has more edges and flex points, so it is more exposed to cracking than a small chest logo.

• Check the label on arrival and follow it if it conflicts with general advice.
• The catalog does not list a dryer rating or a print-specific cure method, so treat heat as the risk to avoid.

Wash it inside out, cold, on a gentle cycle

Turn the sweatshirt inside out before it goes anywhere near the machine. Inside out, the drum and other garments rub against the cotton rather than the print, which is the single easiest way to slow print wear. Use cold water and a gentle or delicate cycle, and keep the load loosely packed so the fabric is not twisted against itself.

Use a mild detergent and skip fabric softener. Softener leaves a residue that can dull a screen print and reduce the cotton's natural softness over time. If the sweatshirt is only lightly worn, a cold rinse cycle is often enough; save the full wash for actual soiling.

• Common mistake: washing with heavy items like jeans or towels, which abrade the print.
• Checkpoint: if you can see the print through the fabric when inside out, it is correctly turned.

Air dry instead of tumble drying

Heat is the main enemy of both the print and the fit. Tumble drying at high heat can shrink 100% cotton and make a screen print crack or lift at the edges. Instead, reshape the sweatshirt by hand while it is damp, then lay it flat on a drying rack or hang it on a padded hanger away from radiators and direct sun.

If you must use a dryer, choose the lowest heat setting and remove the sweatshirt while it is still slightly damp, then finish by air drying. That reduces the time heat is applied without leaving it wet long enough to develop odors.

• Hanging by the shoulders on a thin wire hanger can stretch the neckline; use a wide or padded hanger.
• Drying flat is the safest option for preserving the set-in sleeve shape.

Handle stains and ironing without wrecking the print

Blot stains with a clean cloth and cold water as soon as possible, working from the outside of the stain inward so you do not spread it. Avoid hot water and chlorine bleach, which can fade the cotton and damage the print. For stubborn marks, apply a small amount of mild detergent directly and rinse before washing as usual.

If the sweatshirt needs pressing, iron it inside out and never place the iron directly on the printed areas. A warm setting with no steam is enough for cotton; steam plus direct contact is what causes prints to stick, shine, or peel. Let the garment cool completely before folding it away.

• Common mistake: ironing the front print to smooth wrinkles, which can melt or glaze the ink.
• Checkpoint: if the iron touches the print, stop and reposition the garment inside out.

Storing it between wears

Fold the sweatshirt rather than hanging it for long-term storage. Hanging a 350gsm cotton garment for months can pull the shoulders out of shape and stretch the neckline. Keep it in a dry, dark place; prolonged direct sunlight can fade the cotton and the print over time.

If you store it seasonally, make sure it is fully dry first. Damp cotton packed away can develop mildew, which is difficult to remove without harsh treatment that would also affect the print.

• Cedar or lavender sachets help with storage freshness without adding moisture.
• Avoid vacuum bags for long-term storage of prints, since compression can crease the ink.

Your step-by-step Navajo Sweatshirt care routine

1. Turn it inside out and check pockets: Empty any pockets and flip the sweatshirt so the printed front and sleeves face inward. This puts the cotton between the print and the drum. Checkpoint: the print should not be visible from the outside before you load the machine.
2. Wash cold on a gentle cycle with mild detergent: Select cold water and a delicate or gentle cycle. Add a small amount of mild detergent and skip fabric softener and bleach entirely. Common mistake: overloading the machine, which increases friction on the print.
3. Reshape and air dry away from heat: Lift the sweatshirt out, reshape the shoulders and sleeves by hand, and lay it flat on a rack or hang it on a padded hanger away from radiators and direct sun. Checkpoint: if the garment is still damp after several hours, rotate it rather than reaching for the dryer.
4. Iron inside out only if needed: Use a warm, steam-free setting and press the inside of the fabric. Never let the iron touch the screen print directly. Common mistake: ironing the print to remove wrinkles, which can crack or glaze the ink.
5. Fold and store dry: Once fully dry and cool, fold the sweatshirt and store it in a dry, dark place. Avoid hanging it for long periods to protect the neckline and shoulders. Next step: rotate it into regular wear rather than storing it compressed for months.

Product facts worth knowing

• Beyond two Souls - Navajo Sweatshirt: Regular fit with set-in sleeves, 100% organic cotton at 350gsm, front and sleeve screen print. The heavier cotton and set-in sleeves give it a structured fit, while the extended print means more surface area to protect during washing and ironing.
• Beyond: Two Souls Tee: 100% cotton at 210gsm, Department of Paranormal Activities design. If you prefer a lighter layer for warmer months or want a matching set, the tee uses the same cotton care logic but a lighter weight.
• Quantic Dream Mug: 100% ceramic, microwaveable, features the Quantic Dream studio logo. A low-maintenance companion piece for your desk; unlike the sweatshirt, it tolerates the microwave, though hand washing keeps the logo crisp.

The Beyond: Two Souls Navajo Sweatshirt is straightforward to care for once you treat heat and friction as the two things to avoid. Wash it inside out in cold water, air dry it, and keep the iron off the print, and the 350gsm organic cotton and screen print will hold up through everyday wear.